SEARCH RESULTS

Rosenberger offers a wide range of low-PIM transmission line devices to support high quality RF transmission line designs and deployments, and high performance TMAs to ensure high data through-put and thereby less dropped calls and improved network quality.

Rosenberger has a full range of installation material and accessories to ensure the best installation practices leading to higher quality and thereby better overall long-term system performance.

Rosenberger presents a new and innovative GPS over Fiber system for applications where coax cannot be used to route the GPS signal to base stations. With more centralized RAN and large-scale DAS applications, there are many cases where the GPS antennas are located too far from the base stations for coaxial losses to be acceptable. To overcome this issue, the GPS over Fiber system converts the RF signal to light, transmits it over the fiber, and then restores the light to the original RF signal. Working in contrast to the many systems that employ a bulky remote unit – which requires power and separate mounting space – as well as a large master unit encompassing an active GPS splitter, Rosenberger has rethought the process and designed a fiber-optic replacement for the coaxial cable. Instead of a master unit and a remote unit, the system uses an electrooptical converter (E/O converter) at the antenna and an opto-electrical converter (O/E converter) near the base station. By employing this method, the E/O converter becomes a small, compact unit that connects directly to the GPS antenna. The unit is so small that it can even fit within a 1 ½ inch pipe of the kind often used to mount GPS antennas. The O/E converter handles all alarms and is a compact unit. It can be used to power the E/O converter and can be connected to standard GPS splitters with full support for their redundancy functionality. This means that the GPS over Fiber system fully emulates the behavior of a passive copper cable and GPS antenna, allowing any device that is normally connected to the GPS antenna to maintain proper operation when connected to an O/E converter. Interconnecting the two units i.e. E/O converter to the O/E converter is a thin hybrid cable comprised of fiber and power, which means no power source is required at the GPS antenna. The individual link support for each GPS antenna allows for the flexibility of using a normal coaxial configuration and simply replacing each coax cable from a GPS antenna with an E/O converter, an O/E converter, and a hybrid cable. With a maximum hybrid cable length of 1.9 miles (3 km), this system can meet the demands of almost any installation

When it comes to ensuring straightforward connector and cable assembly, Rosenberger has got it covered. Rosenberger offers a wide range of specialist tools and accessories including those for crimping and handling crimp inserts, as well as torque wrenches and various extraction tools and accessories. To select tools for specific connectors or applications, please see Rosenberger data sheets and / or assembly instructions.

PreCONNECT® OCTO is a comprehensive system for structured parallel optical data transmission cabling. By using 16 fibers for each MTP® connection, Rosenberger OSI has created a high-performance, efficient multifiber cabling product that optimizes results by reducing both costs and attenuation.

The 8-fiber design reduces costs by making optimum use of all the fibers. PreCONNECT® OCTO is backwards-compatible and can be integrated in existing network structures with duplex technology by means of MTP® harnesses. The elimination of unnecessary interfaces and module cassettes also helps cut costs and reduces channel attenuation. The PreCONNECT® OCTO cabling system enables the optimization of the data transfer in network structures.

PreCONNECT® DUODECIM is the perfect solution for all who still have conventional transceivers for duplex applications like 10/25/50 GBE and 8/16/32 GFC on both cabling sides in foreseeable time, but want to be prepared for the migration to MPO based parallel optics applications. Trunks and 19" panels can be further used for migration. The fiber optic cabling system PreCONNECT® DUODECIM promises investment security by optimal use of the trunks for duplex applications and MPO based parallel optical applications. The perfectly matched modular individual components are quick and easy to install thanks to the factory-fabricated Plug & Play system.

PreCONNECT® STANDARD products are a holistic structured fiber optic cabling solution. In 1991 Rosenberger OSI introduced already high fiber factory assembled fiber optic trunk cables to the market. PreCONNECT® STANDARD was the first high fiber modular Plug & Play fiber optic cabling system developed and manufactured in Europe for the fields of application in data centers, office and campus buildings.

PreCONNECT® TRUNK MULTIJUMPER are especially suitable for applications of the direct connection of equipment in data centers, SANs and server farms for cabling of big switches and stand-alone IT-Hardware.

PreCONNECT® BREAKOUT are our factory assembled, robust fiber-optic breakout cables with up to 24 fibers. The solution is suitable for fast, simple and secure Plug & Play installation of less fibers of short lengths. The both-sided PreCONNECT® square-interface enables tool-less mounting by simple hook-in in PreCONNECT® 19" panels and universal holders. Fields of application for the fiber optic breakout cabling system are data centers and their IT rooms, data center containers and EDGE computing sites.

PreCONNECT® trunk for mobile applications, equipped with fiber optic loose-tube cables up to 12 fibers (more fibers on request) on very robust portable and mobile cable drums. For the emergency replacement for destroyed links (disaster recovery), mobile TV applications and temporary cabling.

Cabling design created by experts, operational flexibility, modularity and fast, simple installation with performance guaranteed: that is PerCONNECT®. The continuous LAN cabling system finds its application in building cabling and in the office area. PerCONNECT® combines copper and fiber optic transmission technologies to create an optimized building cabling concept – simple, flexible, cost-effective.

PerCONNECT® EcoFlex’IT™ is the next step on from PerCONNECT®, with active components and an innovative overall concept which focuses on efficient and flexible and find its application in new and existing network installations. A central element in this complete system is the Active Consolidation Point (ACP), which is integrated in the backbone with fiber optics and is distributed in the close tertiary area (max. 20 m) on copper trunks or patch cables. PerCONNECT® EcoFlex’IT™ is a ring configuration which is redundantly designed as an FTTACP (fiber to the active consolidation point). By installing the ACPs in raised floors, ceilings or walls, the cabling system can be integrated in any work environment without the need for additional space, can be taken out again at any time, is easy to move and is flexibly upgradeable.

PreCONNECT® COPPER from Rosenberger OSI are factory assembled copper data cable trunks and Multijumper for Plug & Play installations and find their applications in infrastructure and IT room cabling in data centres.

PreCONNECT® COPPER ToR – Generation 2 is the re-design of our factory assembled copper data cable Trunks optimized for "top-of-the-rack" Plug & Play installations for applications in data centers.

The PreCONNECT® COPPER High Density trunk the consistent further development of our successful PreCONNECT® COPPER ToR-G2 trunks, to fulfil the demand on even higher port density.