Telekomünikasyon Uygulamaları

The ELCT series is the exclusive elctrodes for Fujikura fusion splicers. In order to preform Fujikura splicers properly and completely, the genuine electrodes shall be utilized. The ELCT series is supplued with a pair, for the anode and the cathode respectively.

The Fiber Holder, FH-70 series is exclusively used for Fujikura single and ribbon fiber Splicers. Fujikura　Fiber Holder System is developed to provide appropriate splicing work for several kinds of fibers, single fibers or fiber ribbons. The FH-70 series is supplied with a pair, for the left and the right respectively..

The function is to support user to transfer the drop cable easily from splicing area to heating module.

AC power cord for Fujikura Fusion Splicer or Accesories.

AC adapter for Fujiukra Fusion Splicer.

Battery Pack for Fujikura fusion splicer.

The FST-12 is a tool to quickly split a 12-fiber ribbon into individual fibers or sub-groups with separation ratio from 1:11 to 6:6.

The FAT-04 is designed to arrange 250μm coated fibers and to make a temporary ribbon configutation so that the fibers may be mass fusion spliced using the same procedures as conventional ribbon fiber.

The TJ series are designed for temporary jointing of optical fiber andor ribbon by using fiber holder.

Fujikura’s FuseConnect™ with factory pre-polished ferrule, utilizes fusion splicer to terminate the connector in the field. This eliminates polishing, adhesives and crimping in the field, which minimizes the potential for operator error and expensive connector scrap. Fusion splice addresses return loss concerns present in analog optical networks. This advanced process yields true APC performance for SC/APC and LC/APC configuration. The innovative design and simplified field installation makes the FuseConnect™ the ideal choice for various fiber termination and FTTX applications.

The visual fault identifier FVI-01 is a miniature red-laser light source. The red light generated from FVI-01 will be identified at the break point, sharp-bend or high loss connection in coating fiber or fiber cord.

The FLS-20T is rugged and compact designed laser light source, which is used for optical fiber testing. The wavelength is selectable 1310nm and 1550nm for single mode fiber.

FID-30R and FID-31R are optical fiber identifier for telecommunication cable. FID-30R is built-in optical power meter.

SS03 have three holes. The smallest hole is for stripping 250 um cable down to glass fiber. The second hole is for stripping 900 um buffer coating down to 250 um buffer coating. The biggest hole is for stripping 2-3mm fiber jacket down to 900 um buffer coating.

ADC-13/18/19 supplies DC poer exclusively for Fujikura Fusion Splicers.ADC series can be used as an AC adapter, battery charger or an external DC poer inlet port.