Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Fiber Ek Cihazı ve İlgili Ürünler
Nyfors AutoCleaver S1
Ürün Kodu OHSEZU
Nyfors product. The AutoCleaver S1™ senses the edge of the coating to automatically adjust the bare fiber length after cleaving. This feature is valuable when a specific and accurate bare fiber length is required. The requested bare fiber length is specified by the customer at order and can be fine tuned by software between 0 and 500 μm.
- Fully automatic
- Low cleave angles, < 0.3 degrees
- Very flat end faces
- Operator independent
- Designed for production environment
- Automatic fiber waste collection
- Long-lasting diamond
- Available for 80 and 125 μm clad fiber
- PC controllable
Specification Sheet
The FAT-04 is designed to arrange 250μm coated fibers and to make a temporary ribbon configutation so that the fibers may be mass fusion spliced using the same procedures as conventional ribbon fiber.
Ürün Başarıyla Sepete Eklendi
The FSM-100M offer a host of innovative technologies to address the rapidly expanding splicing needs of factory, manufacturing, laboratory and R&D applications. These capabilities of these model's will revolutionize the way users will splice various types of specialty fibers: LDF, low contrast PM, PCF structured, etc.
Ürün Başarıyla Sepete Eklendi
The CT-102 is designed for cleaving silica fiber with 80 to 250mm cladding diameter, specially for its angle cleaving capability.
Ürün Başarıyla Sepete Eklendi
Fiber holder FH-100 series are for Fujikura fusion splicer FSM-100 resies, FSM-40F/PM and FSM-45 series. The FH-100 series are supplied with a pair.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
