CLETOP-S Serisi Optik Konektör Temizleyici

NEOCLEAN-E Simple-to-Use Refillable Design The NEOCLEAN-E uses a simple one push action to quickly and effectively clean contamination from the ferrule end-face of connectors on jumpers or in adapters, reducing cleaning time. It is effective for removing oil, dust, and dirt particulates that can have a negative impact on fiber optic network performance. The replaceable cleaning cartridge can perform 750 cleanings, reducing cleaning cost. Available for SC, FC, ST, E2000, LC and MU connectors with UPC or APC polishes. NEOCLEAN-M Clean MPO/MTP® Connectors with an Easy Push Operation The NEOCLEAN-M is designed to clean MPO and MTP® multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO/ MTP exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector. NEOCLEAN-M2 The NEOCLEAN-M2 is designed to clean MPO-16 and MTP-16 multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M2 uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO-16/ MTP-16 exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector.

FCC3 Debris Destroyer is a cleaning pen for fiber optic connectors and bare fiber. Use the Debris Destroyer to moisten cassette cleaners such as CLETOP-S and OPTIPOP-R, or FiberWipe™ and CleanWipe™, as well as One-Click cleaners for the wet cleaning of tough end-face contamination challenges.

Today’s splicing equipment is fast, efficient, and requires minimal maintenance due to advances in splicing technology. However, environmental contamination, such as dust, dirt, and fiber coating debris, as well as, the silica deposits generated during the fusion process eventually find their way to the optical elements and v-grooves. This contamination will offset the fibers and degrade performance. Thorough cleaning of a fusion splicer’s optical elements and alignment V-grooves is critical to ensure successful trouble-free splicing operations. CS-1 Cotton Swabs are especially useful for such cleaning operations. The small size of the CS-1 swabs ensures accessibility in tight places and will not leach out chemicals or lint and contaminate optical elements.

CLETOP (ACT) adapter cleaning sticks offered by AFL are an easy and efficient means of cleaning fiber optics connectors in adapters and cleaning alignment sleeves. CLETOP sticks are available in sizes for most common commercial connectors (ST, SC, FC, LC, MU), military connectors, and LEMO connectors for video applications. When connectors need to be cleaned inside adapters, you can rely on the CLETOP stick.