Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
_77db6b88-e2ca-4985-907b-3542f4308750.jpg "HFM® - Yüksek Hızlı FAKRA-Mini")
_419daeb0-6b48-44e3-8f4f-24822ceb04c9.jpg "HFM® - Yüksek Hızlı FAKRA-Mini")
_77db6b88-e2ca-4985-907b-3542f4308750.jpg?w=1800 "HFM® - Yüksek Hızlı FAKRA-Mini")
_419daeb0-6b48-44e3-8f4f-24822ceb04c9.jpg?w=1800 "HFM® - Yüksek Hızlı FAKRA-Mini")
Telekomünikasyon
HFM® - Yüksek Hızlı FAKRA-Mini
Ürün Kodu İAZHYF
Rosenberger HFM® is the next generation of coaxial connectors for the automotive industry. For frequencies up to 15 GHz, the intelligent modular system ensures fast transmission of high data rates up to 20 Gbps. Its innovative design addresses the growing requirement for cost savings as well as reduced weight and size. Delivering space savings of up to 80 % compared to conventional FAKRA connectors, the Rosenberger HFM® connector system allows various modules to be accommodated in the smallest possible footprint.
- Impedance 50 Ω
- Frequency range DC up to 15 GHz
- High data rates up to 20 Gbps
- Return loss:
- ≥ 25 dB, DC to ≤ 3 GHz
- ≥ 20 dB, > 3 GHz to ≤ 6 GHz
- ≥ 15 dB, > 6 GHz to ≤ 12 GHz
- ≥ 12 dB, > 12 GHz to ≤ 15 GHz
- Mating cycles ≥ 25
The AQ2200-651 Signal Generator module reduces the complexity and cost of 10G optical transceiver testing by combining Signal Generation functions into the same mainframe that provides bus and power control while performing BERT and Optical testing. This allows a single programming interface to control all aspects of the transceiver test, simplifying test setup, decreasing test time and increasing productivity. The wiring complexity and test bench size are reduced by replacing up to 5 Signal Generators with a single module.
Ürün Başarıyla Sepete Eklendi
Ürün Başarıyla Sepete Eklendi
Ürün Başarıyla Sepete Eklendi
Rosenberger provides a variety of snap-in D-Sub coaxial and power inserts for fast, reliable mixed card edge chassis. Their small dimensions allow high packing densities as well as easy connection. A combination including power connectors is also available on request. D-Sub Coax Inserts and cable connectors 50 Ω are designed for use in mixed card edge connections in accordance to D-Sub. The maximum frequency is approximately 2 GHz. Available on request. Power Inserts meet the requirements of DIN 41626-T1 and are designed for use in mixed card edge connections in accordance to DIN 41612 or D-Sub. Contact current 10 A, 20 A, 30 A, 40 A. Available on request.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
