Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Telekomünikasyon
Nyfors AutoCoater 2 SC
Ürün Kodu SD5WET
Nyfors product. The AutoCoater 2 SC™ is used to restore the protective coating on acrylate coated optical fibers in high strength applications. It is fully automatic, allowing for operator skill independent operation in factory environments with high cost and productivity advantages. This modified version of the automatic AutoCoater 2™ is equipped with special clamps for recoating applications where only short lengths of fiber are available. A narrower positioning and shorter distance between the fiber clamps than in the standard version enables clamping and recoating of fibers as short as 124 mm without reducing the recoat length itself.
- Automatic and operator skill independent
- Short cycle time
- Special fiber clamps for recoating with short fiber lengths
- Easy mold exchange and replacement
- Handles most fiber dimensions with custom molds available
- Uniform diameter, overcoating and undersize recoating capability
- Short curing times
- High and low-index recoating
- No need for compressed air or vacuum
Specification Sheet
The AQ6150B Optical Wavelength Meter is an ideal instrument for accurately measuring the optical wavelength of optical devices and systems with wavelength ranges from 900 nm to 1700 nm. By employing a Michelson interferometer and a high speed Fast Fourier Transform (FFT) algorithm, the AQ6150B can measure not only a single wavelength laser signal, but also a multiple wavelength laser signal from a DWDM system and Fabry-Perot laser. Furthermore, this technology enables the measurement of modulated laser signals in addition to the CW signal from an optical transceiver. The optimized optical design and data processing routine significantly reduces the measurement time and improves manufacturing throughput.
Ürün Başarıyla Sepete Eklendi
5.75″ Electrician Kevlar® Scissors with Cushioned Ergonomic Handles
Ürün Başarıyla Sepete Eklendi
Rosenberger RPC-TNC precision connectors feature threaded locking mechanism and are suitable for applications up to 18 GHz. Based on the BNC series interface, they are intermateable with standard TNC connectors, 50 Ω and 75 Ω types both. The wide product range includes cable connectors, adaptors and test & measurement accessories such as calibration kits or measurement equipment (open – short – load). Furthermore, variants for aviation and spaceflight applications are available.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
