TW-AH Serisi

NEOCLEAN-E Simple-to-Use Refillable Design The NEOCLEAN-E uses a simple one push action to quickly and effectively clean contamination from the ferrule end-face of connectors on jumpers or in adapters, reducing cleaning time. It is effective for removing oil, dust, and dirt particulates that can have a negative impact on fiber optic network performance. The replaceable cleaning cartridge can perform 750 cleanings, reducing cleaning cost. Available for SC, FC, ST, E2000, LC and MU connectors with UPC or APC polishes. NEOCLEAN-M Clean MPO/MTP® Connectors with an Easy Push Operation The NEOCLEAN-M is designed to clean MPO and MTP® multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO/ MTP exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector. NEOCLEAN-M2 The NEOCLEAN-M2 is designed to clean MPO-16 and MTP-16 multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M2 uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO-16/ MTP-16 exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector.

The Rosenberger HVR®300 connector system not only provides a maximum current carrying capacity of 320 A, it takes up minimal space. It features a 2-pole angled coupler for shielded cables and a cable cross section of 70 mm² along with the corresponding header. A cross section of 50 mm² is available on request. The lever locking mechanism is secured with an additional slider (CPA – Connector Position Assurance) to prevent accidental unmating.

AFL’s PowerCleave combines the precision of an ultrasonic cleaver with the ease and improved fiber management of the Fujikura fiber holder system. The PowerCleave™ utilizes the tensile stress method to avoid touching or damaging the bare glass surface during cleaving, ensuring highly robust, reliable and durable splice results. The PowerCleave provides consistent flat ends even at cleave lengths as short as 3 mm. Specially designed for use with Fujikura’s specialty market splicers, this advanced cleaving system allows for more reliability and greater splicing consistency with less dependence on operator technique.