CLETOP (ACT) Adaptör Temizleme Çubukları

CCT Connector Cleaning Tips are a unique technology in fiber connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fiber end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results. CCT Connector Cleaning Tips offered by AFL are intended for cleaning the ferrule end-faces in adapters and sockets, as well as the exposed ferrules and termini of jumpers. CCTs are available for most commercial and Military Specification ferrule sizes.

Today’s splicing equipment is fast, efficient, and requires minimal maintenance due to advances in splicing technology. However, environmental contamination, such as dust, dirt, and fiber coating debris, as well as, the silica deposits generated during the fusion process eventually find their way to the optical elements and v-grooves. This contamination will offset the fibers and degrade performance. Thorough cleaning of a fusion splicer’s optical elements and alignment V-grooves is critical to ensure successful trouble-free splicing operations. CS-1 Cotton Swabs are especially useful for such cleaning operations. The small size of the CS-1 swabs ensures accessibility in tight places and will not leach out chemicals or lint and contaminate optical elements.