Fiber Protection Sleeves for Ribbon fiber FPS series/ FP-04T /FP-05

The 41R is a equipped with good mobility and our wireless communication function, “Active Blade Management Technology”, where the splicer is connected to and monitors the fiber cleaver and ribbon fiber stripper With Active Blade Management Technology, it is far easier to maintain high quality fiber preparation. This product monitors every fiber’s end shape to assess the cleave quality. If the cleaved fiber is bad due to a worn blade position, this product sends a command to the fiber cleaver to rotate to the next viable blade position. The cleaver then executes the blade rotation automatically via an internal motor. This functionality greatly prevents operators from making a bad splice due to a worn out blade position. In addition, both the heating temperature and heating time of the ribbon fiber stripper are automatically changed according to the splice mode setting.

The FP-03 series is the industry standard for durable and lasting protection of single fiber splices in field installations. The FPS01 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.

Fujikura’s FuseConnect™ with factory pre-polished ferrule, utilizes fusion splicer to terminate the connector in the field. This eliminates polishing, adhesives and crimping in the field, which minimizes the potential for operator error and expensive connector scrap. Fusion splice addresses return loss concerns present in analog optical networks. This advanced process yields true APC performance for SC/APC and LC/APC configuration. The innovative design and simplified field installation makes the FuseConnect™ the ideal choice for various fiber termination and FTTX applications.

AFL’s LZM-100 LAZERMaster is a glass processing and splicing system that uses a CO2 laser heat source rather than electrodes, ensuring repeatable performance and low maintenance, and eliminating electrode or filament maintenance and instability. Splicing or adiabatic tapering (to create mode field adapters or pump combiners) can be performed with glass diameters of 2.3 mm or less. The high resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes.