Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Fiber Ek Cihazı ve İlgili Ürünler
LAZERMaster™ Laser Splicing System LZM-100
Ürün Kodu 31BLX8
AFL’s LZM-100 LAZERMaster is a glass processing and splicing system that uses a CO2 laser heat source rather than electrodes, ensuring repeatable performance and low maintenance, and eliminating electrode or filament maintenance and instability. Splicing or adiabatic tapering (to create mode field adapters or pump combiners) can be performed with glass diameters of 2.3 mm or less. The high resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes.
- CO2 laser eliminates electrode or filament maintenance, provides extremely stable operation and greatly reduces the need for periodic calibration
- Automated laser beam diameter control to fine tune the size of the heating area
- Redundant automated laser safety features
- 2.3 mm maximum fiber diameter (larger fibers may be spliced manually)
Specification Sheet
SS01 have one hole for stripping 250 um cable down to glass fiber.
Ürün Başarıyla Sepete Eklendi
The APM-101 perform all the steps required to prepare optical fibers before splicing – automatically and with high consistency. This includes stripping the fiber without degrading fiber quality, cleaning fiber with alcohol to remove coating residue, and cleaving consistently at a right angle to the fiber axis. The entire process is complete in as little as 23 seconds.
Ürün Başarıyla Sepete Eklendi
Ürün Başarıyla Sepete Eklendi
The Fiber holder FH-40-LT900 is exclusively designed for holding loose tube buffered fiber by Fujikura's fusion splicer,FSM-100 series, FSM-45 series, FSM-40F and FSM-40PM. The FH-40-LT900 holds the loose tube bufferd fiber by tightening a screw in the lid. The FH-40-LT900 is supplied with a pair.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
