-
Telekomünikasyon
-
Fiber Optik Kablolar
- < div class="menu-icon"> div > Konvansiyonel Kablolar
- < div class="menu-icon"> div > OPGW
- < div class="menu-icon"> div > ADSS
- < div class="menu-icon"> div > Denizaltı Kablolar
- < div class="menu-icon"> div > WTC (Dünyada en Yüksek Fiber Kapasiteli Kablo)
-
Optik Fiberler
- < div class="menu-icon"> div > Multi Mode
- < div class="menu-icon"> div > Single Mode
- < div class="menu-icon"> div > Özel Uygulamalar için Fiberler
-
Fiber Ek Cihazı ve İlgili Ürünler
- < div class="menu-icon"> div > Telekomünikasyon Uygulamaları
- < div class="menu-icon"> div > Özel Uygulamalar
-
Optik Test Cihazları
- < div class="menu-icon"> div > Optik Spektrum Analizörler
- < div class="menu-icon"> div > OTDR
- < div class="menu-icon"> div > Optik Dalgaboyu Ölçüm Cihazı
- < div class="menu-icon"> div > Modüler Üretim Test Sistemi
- < div class="menu-icon"> div > Taşınabilir Optik Güçölçerler & Işık Kaynakları
- < div class="menu-icon"> div > Taşınabilir Ethernet Test Cihazları
-
RF Ürünleri ve Telekom Kuleleri
- < div class="menu-icon"> div > Konnektörler & Adaptörler
- < div class="menu-icon"> div > Kablolar
- < div class="menu-icon"> div > Test Cihazları
- < div class="menu-icon"> div > Antenler
- < div class="menu-icon"> div > Saha Çözümleri
- < div class="menu-icon"> div > Aletler ve Aksesuarlar
- < div class="menu-icon"> div > Telekom Kuleleri
-
Bakır Telekomünikasyon Kabloları
- < div class="menu-icon"> div > Bakır Telekomünikasyon Kabloları
-
F/O Kablolar için Montaj Aksesuarları
- < div class="menu-icon"> div > F/O Kablolar için Montaj Aksesuarları
-
El Aletleri
- < div class="menu-icon"> div > Koaksiyel Kablolar için
- < div class="menu-icon"> div > Fiber Optik Kablolar için
- < div class="menu-icon"> div > Elektrik Kabloları için
- < div class="menu-icon"> div > Güç Kabloları için
-
Fiber Muayene ve Temizlik Ürünleri
- < div class="menu-icon"> div > Fiber Muayene
- < div class="menu-icon"> div > Temizlik Kitleri
- < div class="menu-icon"> div > Basmalı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Makaralı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Fiber Optik Temizleme Sıvıları
- < div class="menu-icon"> div > Temizleme Mendilleri ve Temizleme Kartuşları
- < div class="menu-icon"> div > Temizleme Çubukları & Uçları
-
Optik Aksesuarlar
- < div class="menu-icon"> div > Merkez Ofis Uygulamaları
- < div class="menu-icon"> div > Optik Kabinler
- < div class="menu-icon"> div > Çok Katlı Bina Çözümleri
- < div class="menu-icon"> div > Kutular ve Optik Prizler
- < div class="menu-icon"> div > Optik Bölücüler
- < div class="menu-icon"> div > Optik Ek Kutuları
-
-
-
- Medikalde Fiber
- Güneş Pili
Fiber Ek Cihazı ve İlgili Ürünler
Nyfors AutoCoater 2 SC
Ürün Kodu SD5WET
Nyfors product. The AutoCoater 2 SC™ is used to restore the protective coating on acrylate coated optical fibers in high strength applications. It is fully automatic, allowing for operator skill independent operation in factory environments with high cost and productivity advantages. This modified version of the automatic AutoCoater 2™ is equipped with special clamps for recoating applications where only short lengths of fiber are available. A narrower positioning and shorter distance between the fiber clamps than in the standard version enables clamping and recoating of fibers as short as 124 mm without reducing the recoat length itself.
- Automatic and operator skill independent
- Short cycle time
- Special fiber clamps for recoating with short fiber lengths
- Easy mold exchange and replacement
- Handles most fiber dimensions with custom molds available
- Uniform diameter, overcoating and undersize recoating capability
- Short curing times
- High and low-index recoating
- No need for compressed air or vacuum
BENZER ÜRÜNLER
The 41R is a equipped with good mobility and our wireless communication function, “Active Blade Management Technology”, where the splicer is connected to and monitors the fiber cleaver and ribbon fiber stripper With Active Blade Management Technology, it is far easier to maintain high quality fiber preparation. This product monitors every fiber’s end shape to assess the cleave quality. If the cleaved fiber is bad due to a worn blade position, this product sends a command to the fiber cleaver to rotate to the next viable blade position. The cleaver then executes the blade rotation automatically via an internal motor. This functionality greatly prevents operators from making a bad splice due to a worn out blade position. In addition, both the heating temperature and heating time of the ribbon fiber stripper are automatically changed according to the splice mode setting.
Ürün Başarıyla Sepete Eklendi
The CT50 offers enhanced drop impact resistance compared to other existing cleavers and allows workers to replace the cleaving blade, providing customers with a drastic reduction in handling time and maintenance costs. The CT50 changes the position of the cleaving blade automatically and in accordance with the condition of the cleaving state of optical fibers on a fusion splicer through wireless communication. In addition,the CT50 can complete cleaving works including scrap collection, with a single-step.
Ürün Başarıyla Sepete Eklendi
The 90S+ is a core alignment fusion splicer, setting a new standard in the market for fusion splicing. The 90S+ is packed with a whole host of new and enhanced features, specifically developed to enable faster splice cycle times with higher precision.
Ürün Başarıyla Sepete Eklendi
The FSR-07 has a recoater and mandrel proof testing.This model is appropriate not only for recoating but also reliability proof testing as well as tension testing to failure.
Ürün Başarıyla Sepete Eklendi
- TMM Telekom Makine Madencilik San. Ve Tic.Ltd.Şti, müşterilerinin çeşitli ihtiyaçları için uluslararası pazara hizmet veren uluslararası bir şirkettir.
- İletişim
- İletişim Formu
- Mail Gönder
- Bizi Takip Edin
- Bizi Arayın