Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Fiber Ek Cihazı ve İlgili Ürünler
Nyfors ReCoater 2
Ürün Kodu 4GRFGK
The ReCoater 2 is used to restore the protective coating on acrylate coated optical fibers in high strength applications. Molds are available in different sizes to cover a range of coating diameters and can easily be exchanged by the operator with no realignment required. Custom molds are available upon request.
- Easy mold exchange and replacement
- Handles most fiber dimensions, with custom molds available
- Uniform diameter, overcoating and undersize recoating capability
- Short curing times
- High and low-index recoating
- Linear or mandrel strength testing
Specification Sheet
The function is to support user to transfer the drop cable easily from splicing area to heating module.
Ürün Başarıyla Sepete Eklendi
Fujikura’s FuseConnect™ with factory pre-polished ferrule, utilizes fusion splicer to terminate the connector in the field. This eliminates polishing, adhesives and crimping in the field, which minimizes the potential for operator error and expensive connector scrap. Fusion splice addresses return loss concerns present in analog optical networks. This advanced process yields true APC performance for SC/APC and LC/APC configuration. The innovative design and simplified field installation makes the FuseConnect™ the ideal choice for various fiber termination and FTTX applications.
Ürün Başarıyla Sepete Eklendi
The visual fault identifier FVI-01 is a miniature red-laser light source. The red light generated from FVI-01 will be identified at the break point, sharp-bend or high loss connection in coating fiber or fiber cord.
Ürün Başarıyla Sepete Eklendi
Optical fiber cleaver by Fujikura's technologies as world-wide leader of fusion splicers. The technologies make the operation easy and the cleaving quality good.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
