Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Özel Uygulamalar
Fiber Cleaver CT52
Ürün Kodu OGG8DH
The CT52 is designed for cleaving silica fiber with 125μm cladding diameter, specially for its short length cleaving capability. Minimum 3mm cleave is possible by up to 900μm fiber coating, while the coating to be clamped.
- Only for single optical fiber
- Short length cleaving avialable to 3mm
- Automatic cleaving blade rotation
- User replaceable fiber clamps and cleaving blade
- Wide lever opening angle allows easy fiber placement
Specification Sheet
LTC-01 is the special tool for removing loose tube without damage to the UV acrylate coated optical fiber inside the loose tube.
Ürün Başarıyla Sepete Eklendi
The Fiber holder FH-40-LT900 is exclusively designed for holding loose tube buffered fiber by Fujikura's fusion splicer,FSM-100 series, FSM-45 series, FSM-40F and FSM-40PM. The FH-40-LT900 holds the loose tube bufferd fiber by tightening a screw in the lid. The FH-40-LT900 is supplied with a pair.
Ürün Başarıyla Sepete Eklendi
Nyfors Product. The AutoCleaver LDF™ (Fujikura edition) is a high precision fiber cleaver, designed for cleaving of large diameter fiber (LDF). It provides outstanding cleaving performance for large diameter fibers from 230 μm up to 1000 μm in diameter. The unique and patent pending cleaving process generates typical cleave angles of less than 0.5 degrees.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
