Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Optik Fiberler
FutureGuide®-SR15E-200 NEW ITU-T G.657.A1 (+ 200µm Coating Diameter)
Ürün Kodu RATM4G
Optical fiber networks in urban areas demand more effective utilization of available space by installing high density and more fiber-count cables underground. Especially, such demand is increasing in access network. Employing our innovative fiber coating technology in FutureGuide®-SR15E we launch a new ITU-T G.657.A1 fiber with 200μm coating diameter named FutureGuide®-SR15E-200. The fiber has drastically reduced coating diameter, while keeping microbend characteristics equivalent to conventional fibers. The 200μm coating diameter with tolerable microbend performance allows around 40% reduction of cable cross-section area. This new fiber strongly contributes to not only more effective utilization of available space but also saves costs of manufacture, transportation and installation of cables.
- Reduced coating diameter down to 200μm with tolerable microbend performance
- Improved macrobend performance complying with ITU-T G.657.A1
- 12 fiber mass fusion splicing
- Zero(low)-water peak attenuation complying with ITU-T G.652.D
Specifications
Multi Mode Fiber with 62.5µm of Core Diameter Short-Reach Optical Transmission for LAN in Offices and Premises
Ürün Başarıyla Sepete Eklendi
Multi Mode Fiber with 50µm of Core Diameter (OM-3) For 10 Gigabit Ethernet Optical Transmission for LAN in Offices and PremisesFuture: Full complying with 10Gbase-SR,SW for IEEE 802.3ae. Link length for 10Gigabit Ethernet is 300m.
Ürün Başarıyla Sepete Eklendi
Fujikura's single-mode optical fiber with high temperature resistant acrylate coating protects the optical fiber up to 200°C (short term). The fiber is applied to harsh environments like Oil & Gas industry. Figure1 shows the results of attenuation variation in 200°C. We obtained not more than 0.01 dB/km variations at both 1310 nm and 1550 nm. Table shows the specification of the fiber.
Ürün Başarıyla Sepete Eklendi
As the number of channels increases with DWDM, the higher intensity of light in a fiber induces various non-linear effect of light, causing signal distortion in a long span. Fujikura have developed FutureGuide®-LA, which is designed for inhibiting non-linear effect with non-zero dispersion characteristic at 1530-1565nm region and with large effective area, offering for long distance DWDM transmission in C and L bands.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
