Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Özel Uygulamalar
Nyfors AutoCleaver S2
Ürün Kodu 3UUPDF
Nyfors product. The AutoCleaver S2 is a modified version of the NYFORS automatic fiber cleaver, designed for the cleaving of air-clad fibers. It provides outstanding cleaving performance for fi bers from 125 μm up to 1000 μm in diameter. A unique and patent pending cleaving process generates typical cleave angles of less than 0.5 degrees.
- Fully automatic
- Low cleave angles < 0.5 degrees
- Very flat end faces
- Operator independent
- Automatic fiber waste collection
- Long-lasting diamond
- PC controllable
Specification Sheet
The FAT-04 is designed to arrange 250μm coated fibers and to make a temporary ribbon configutation so that the fibers may be mass fusion spliced using the same procedures as conventional ribbon fiber.
Ürün Başarıyla Sepete Eklendi
The JS-02-900 is designed for stripping single count of silica optical fiber. The JS-02-900 accepts the FH-40 series and FH-100 series Fiber Holder System.
Ürün Başarıyla Sepete Eklendi
The FSM-100M offer a host of innovative technologies to address the rapidly expanding splicing needs of factory, manufacturing, laboratory and R&D applications. These capabilities of these model's will revolutionize the way users will splice various types of specialty fibers: LDF, low contrast PM, PCF structured, etc.
Ürün Başarıyla Sepete Eklendi
The FSR-07 has a recoater and mandrel proof testing.This model is appropriate not only for recoating but also reliability proof testing as well as tension testing to failure.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
