Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Özel Uygulamalar
Nyfors CleaveMeter 3D
Ürün Kodu WLRONX
The CleaveMeter 3DTM is a phase-shifting Michelson interferometer for non-contact end-face inspection of cleaved and polished optical fibers with cladding diameters up to 1200 μm. Designed for both production and research applications, this comprehensive fiber optic testing system combines full resolution, three-dimensional surface topography reconstruction and mapping with automated, operator independent measurements of cleave angle and surface flatness in a small, lightweight benchtop unit.
- Full resolution surface reconstruction
- 2D view of surface topography and pointwise slope
- 3D view of surface topography with camera and lighting control
- Extremely accurate, operator independent measurements of cleave angle and surface flatness over arbitrary diameters
- Optional pass/fail indication of cleave angle for fast operation in production environments
Specification Sheet
The CT-102 is designed for cleaving silica fiber with 80 to 250mm cladding diameter, specially for its angle cleaving capability.
Ürün Başarıyla Sepete Eklendi
The ReCoater 2 is used to restore the protective coating on acrylate coated optical fibers in high strength applications. Molds are available in different sizes to cover a range of coating diameters and can easily be exchanged by the operator with no realignment required. Custom molds are available upon request.
Ürün Başarıyla Sepete Eklendi
Nyfors Producrts.The extended length ReCoater 2 XL is used to restore the protective coating on acrylate-coated optical fibers in high strength applications. Designed to process long sections of stripped fiber, it accepts silicone molds of up to 110 mm length.
Ürün Başarıyla Sepete Eklendi
The Fiber holder FH-40-LT900 is exclusively designed for holding loose tube buffered fiber by Fujikura's fusion splicer,FSM-100 series, FSM-45 series, FSM-40F and FSM-40PM. The FH-40-LT900 holds the loose tube bufferd fiber by tightening a screw in the lid. The FH-40-LT900 is supplied with a pair.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
