Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Özel Uygulamalar
Optical Fiber Recoater FSR-05
Ürün Kodu VEBW8L
FSR-05 is a model which has recoating only without a proof tester. This model is appropriate for manufactures that don’t require constant proof testing after each recoat.
- High quality shape of recoating
- Automated easy operation
- Colored and non-colored fiber recoating capability
- Various sizes of mold are available(195 μm, 255 μm, 280 μm, 320μm, 450 μm, 670 μm, 1000 μm)
- Easy mold, resin, and pump exchange
- New bubble catching system removes potentially trapped bubbles before the mold
- Programmable resin injection quantities
- Compatible with special recoating resins to provide higher stiffness recoating of 900 μm jacketed fibers.
- Selectable proof-tester
- PC interface with USB
Specification Sheet
Optical fiber cleaver by Fujikura's technologies as world-wide leader of fusion splicers. The technologies make the operation easy and the cleaving quality good.
Ürün Başarıyla Sepete Eklendi
FSR-06 is a model which has a recoater and proof tester with a linear clamping system. This model is appropriate for devices which conformation of reliability is required.
Ürün Başarıyla Sepete Eklendi
The Fiber holder FH-40-LT900 is exclusively designed for holding loose tube buffered fiber by Fujikura's fusion splicer,FSM-100 series, FSM-45 series, FSM-40F and FSM-40PM. The FH-40-LT900 holds the loose tube bufferd fiber by tightening a screw in the lid. The FH-40-LT900 is supplied with a pair.
Ürün Başarıyla Sepete Eklendi
Nyfors product. The AutoCleaver S2 is a modified version of the NYFORS automatic fiber cleaver, designed for the cleaving of air-clad fibers. It provides outstanding cleaving performance for fi bers from 125 μm up to 1000 μm in diameter. A unique and patent pending cleaving process generates typical cleave angles of less than 0.5 degrees.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
