-
Telekomünikasyon
-
Fiber Optik Kablolar
- < div class="menu-icon"> div > Konvansiyonel Kablolar
- < div class="menu-icon"> div > OPGW
- < div class="menu-icon"> div > ADSS
- < div class="menu-icon"> div > Denizaltı Kablolar
- < div class="menu-icon"> div > WTC (Dünyada en Yüksek Fiber Kapasiteli Kablo)
-
Optik Fiberler
- < div class="menu-icon"> div > Multi Mode
- < div class="menu-icon"> div > Single Mode
- < div class="menu-icon"> div > Özel Uygulamalar için Fiberler
-
Fiber Ek Cihazı ve İlgili Ürünler
- < div class="menu-icon"> div > Telekomünikasyon Uygulamaları
- < div class="menu-icon"> div > Özel Uygulamalar
-
Optik Test Cihazları
- < div class="menu-icon"> div > Optik Spektrum Analizörler
- < div class="menu-icon"> div > OTDR
- < div class="menu-icon"> div > Optik Dalgaboyu Ölçüm Cihazı
- < div class="menu-icon"> div > Modüler Üretim Test Sistemi
- < div class="menu-icon"> div > Taşınabilir Optik Güçölçerler & Işık Kaynakları
- < div class="menu-icon"> div > Taşınabilir Ethernet Test Cihazları
-
RF Ürünleri ve Telekom Kuleleri
- < div class="menu-icon"> div > Konnektörler & Adaptörler
- < div class="menu-icon"> div > Kablolar
- < div class="menu-icon"> div > Test Cihazları
- < div class="menu-icon"> div > Antenler
- < div class="menu-icon"> div > Saha Çözümleri
- < div class="menu-icon"> div > Aletler ve Aksesuarlar
- < div class="menu-icon"> div > Telekom Kuleleri
-
Bakır Telekomünikasyon Kabloları
- < div class="menu-icon"> div > Bakır Telekomünikasyon Kabloları
-
F/O Kablolar için Montaj Aksesuarları
- < div class="menu-icon"> div > F/O Kablolar için Montaj Aksesuarları
-
El Aletleri
- < div class="menu-icon"> div > Koaksiyel Kablolar için
- < div class="menu-icon"> div > Fiber Optik Kablolar için
- < div class="menu-icon"> div > Elektrik Kabloları için
- < div class="menu-icon"> div > Güç Kabloları için
-
Fiber Muayene ve Temizlik Ürünleri
- < div class="menu-icon"> div > Fiber Muayene
- < div class="menu-icon"> div > Temizlik Kitleri
- < div class="menu-icon"> div > Basmalı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Makaralı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Fiber Optik Temizleme Sıvıları
- < div class="menu-icon"> div > Temizleme Mendilleri ve Temizleme Kartuşları
- < div class="menu-icon"> div > Temizleme Çubukları & Uçları
-
Optik Aksesuarlar
- < div class="menu-icon"> div > Merkez Ofis Uygulamaları
- < div class="menu-icon"> div > Optik Kabinler
- < div class="menu-icon"> div > Çok Katlı Bina Çözümleri
- < div class="menu-icon"> div > Kutular ve Optik Prizler
- < div class="menu-icon"> div > Optik Bölücüler
- < div class="menu-icon"> div > Optik Ek Kutuları
-
-
-
- Medikalde Fiber
- Güneş Pili
Özel Uygulamalar
Optical Fiber Recoater FSR-07
Ürün Kodu 4PLYMK
The FSR-07 has a recoater and mandrel proof testing.This model is appropriate not only for recoating but also reliability proof testing as well as tension testing to failure.
- High quality shape of recoating
- Automated easy operation
- Colored and non-colored fiber recoating capability
- Various sizes of mold are available(195 μm, 255 μm, 280 μm, 320μm, 450 μm, 670 μm, 1000 μm)
- Easy mold, resin, and pump exchange
- New bubble catching system removes potentially trapped bubbles before the mold
- Programmable resin injection quantities
- Compatible with special recoating resins to provide higher stiffness recoating of 900 μm jacketed fibers.
- Selectable proof-tester
- PC interface with USB
BENZER ÜRÜNLER
Optical fiber cleaver by Fujikura's technologies as world-wide leader of fusion splicers. The technologies make the operation easy and the cleaving quality good.
Ürün Başarıyla Sepete Eklendi
The CT52 is designed for cleaving silica fiber with 125μm cladding diameter, specially for its short length cleaving capability. Minimum 3mm cleave is possible by up to 900μm fiber coating, while the coating to be clamped.
Ürün Başarıyla Sepete Eklendi
The 90R12 is a mass fusion splicer capable of splicing up to 12 fiber ribbon cables simultaneously. In previous mass fusion splicer models, the v-grooves could become dirty over time due to debris and glass deposits from splicing accumulating in the v-grooves. Which in turn, could lead to fibre offsets and high losses if they were not regularly cleaned which added to the overall process time. The 90R12 comes with a first of its kind, innovative user replaceable V-groove assembly which makes this issue a thing of the past and is supplied as standard equipment with the 90R12 kit. This new V-groove assembly can be quickly and easily fitted in the field, minimizing downtime and maximising productivity. In addition, the new V-groove design enables splicing of both conventional type 12-fiber encapsulated ribbon and SWR (Spider Web Ribbon) whilst also accommodating 250um and 200um pitch fibers. The 90R12 can also splice single fibers if required. also making use of Active Blade Management Technology, which now can connect to two CT50 cleavers simultaneously.
Ürün Başarıyla Sepete Eklendi
Nyfors product. The AutoCleaver S1™ senses the edge of the coating to automatically adjust the bare fiber length after cleaving. This feature is valuable when a specific and accurate bare fiber length is required. The requested bare fiber length is specified by the customer at order and can be fine tuned by software between 0 and 500 μm.
Ürün Başarıyla Sepete Eklendi
- TMM Telekom Makine Madencilik San. Ve Tic.Ltd.Şti, müşterilerinin çeşitli ihtiyaçları için uluslararası pazara hizmet veren uluslararası bir şirkettir.
- İletişim
- İletişim Formu
- Mail Gönder
- Bizi Takip Edin
- Bizi Arayın