ODC-C Serisi

The Rosenberger portable and multifunctional broadband PIM Site Analyzer alpha provides the best alternative of performing the most precise and efficient PIM tests on site. The PIM Site Analyzer alpha consists of a single master unit with band-specific, interchangeable filter units, since the form factor of the filter units is the same. Take out one filter unit, e.g., 900 MHz, and replace with another filter unit, e.g., 1800 MHz, without any calibration of the filter unit, potential adaptors, test cable, or operational mode(s). Future-proof plug and play concept covering 700 to 2700 MHz.

Rosenberger offers a wide test port portfolio of cable assemblies, ruggedized adaptors and an interchangeable port system for vector network analyzers (VNA) up to 90 GHz: Test port cables providing outstanding phase and amplitude stability are also available as sets containing two cables with a standard length of 60 cm each. The range is optimized for frequencies up to 12 GHz, 18 GHz, 26.5 GHz, 40 GHz, 50 GHz, 70 GHz and 90 GHz. VNA test port cables are also available as cable sets, containing two cables of 600 mm standard length, and are supplied in high-quality wooden boxes. Test port adaptors are designed to connect directly to the VNA test port via a ruggedized coupling nut. They are available in the RPC-3.50, RPC-2.92, RPC-2.40, RPC-1.85 and RPC-1.35 connector series. Available as "in series" and "inter series" versions, their ruggedized construction ensures reliable protection of VNA test ports and reduces mechanical abrasion to a minimum. Interchangeable port connectors are designed for test equipment applications using test ports that will be continually mated and re-mated. This has been achieved by the development of an interchangeable port connector system featuring a panel mounting half and an innovative neutral interface, allowing a high number of mating cycles without causing possible damage to the equipment device interface.

applications up to 40 GHz. The shortened male pin and fourfold slotted female center contact allow these high-quality connectors to meet the highest levels of reliability and repeatability performance. RPC-2.92 connectors are intermateable with common 2.92, 3.50, SMA, as well as K connectors. The wide product range comprises cable, PCB and panel connectors, adaptors, interchangeable port connectors, attenuators as well as test & measurement accessories. These include RPC-2.92 calibration kits, test cables, opens, shorts, loads, attenuators, airlines or sliding loads. For test & measurement applications in future 5G networks the frequency range of selected RPC-2.92 adaptors, cable assemblies and compact calibration kits has been extended up to 43.5 GHz.

Based on the SMA connector standard, Rosenberger QMA connectors are designed for applications up to 18 GHz. The quick-lock mechanism enables easy and reliable connections in the tightest of spaces – primarily in mobile base stations – and 10 times faster compared to SMA offerings. Packing density is also superior to SMA due to the minimum pitch and toolless connection, dispensing with the need for torque spanners for fastening coupling nuts. Rosenberger offers QMA as standard version and with plastic quick-lock mechanisms in four different color codings. QMA is not intermateable with SMA.