_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Zinc/Zn
Fiber Splicing Machines & Related Products
Nyfors AutoCleaver S1
Product code OHSEZU
Nyfors product. The AutoCleaver S1™ senses the edge of the coating to automatically adjust the bare fiber length after cleaving. This feature is valuable when a specific and accurate bare fiber length is required. The requested bare fiber length is specified by the customer at order and can be fine tuned by software between 0 and 500 μm.
- Fully automatic
- Low cleave angles, < 0.3 degrees
- Very flat end faces
- Operator independent
- Designed for production environment
- Automatic fiber waste collection
- Long-lasting diamond
- Available for 80 and 125 μm clad fiber
- PC controllable
Specification Sheet
SS01 have one hole for stripping 250 um cable down to glass fiber.
Item Successfully Added to Cart
LTC-01 is the special tool for removing loose tube without damage to the UV acrylate coated optical fiber inside the loose tube.
Item Successfully Added to Cart
Whether splicing similar fiber types or double clad LDF fibers for high power lasers, the FSM-100P+ splicers provide multiple solutions for diverse production needs. The FSM-100 + series sets the standard for fusion splicing with a multitude of new features designed to make splicing easier.
Item Successfully Added to Cart
The CleaveMeter 3DTM is a phase-shifting Michelson interferometer for non-contact end-face inspection of cleaved and polished optical fibers with cladding diameters up to 1200 μm. Designed for both production and research applications, this comprehensive fiber optic testing system combines full resolution, three-dimensional surface topography reconstruction and mapping with automated, operator independent measurements of cleave angle and surface flatness in a small, lightweight benchtop unit.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
