FLASH-LIGHT-SYSTEM-for-TOWERS-03

Rosenberger provides a variety of snap-in D-Sub coaxial and power inserts for fast, reliable mixed card edge chassis. Their small dimensions allow high packing densities as well as easy connection. A combination including power connectors is also available on request. D-Sub Coax Inserts and cable connectors 50 Ω are designed for use in mixed card edge connections in accordance to D-Sub. The maximum frequency is approximately 2 GHz. Available on request. Power Inserts meet the requirements of DIN 41626-T1 and are designed for use in mixed card edge connections in accordance to DIN 41612 or D-Sub. Contact current 10 A, 20 A, 30 A, 40 A. Available on request.

3M™ Expanded Beam Optical (EBO) Latch Connector for PreCONNECT® solutions The best of both worlds: Singlemode and expanded beam connectors Reliable connectors that can be repeatedly plugged in and unplugged while still maintaining constant performance over all fibers – that is what 3M™ EBO has to offer. The innovative yet extremely simple structure of this expanded beam plug connector permits repeated plugging and unplugging with no loss of performance and no need to clean the end faces. What is more, it is all but insensitive to vibrations and dust. Because the end faces of the fibers do not physically touch one another, the risk of chipping, scratches and damage is eliminated, while simultaneously guaranteeing outstanding IL and RL performance. In contrast to earlier expanded beam methods, the 3M™ EBO Expanded Beam Latch connector uses a new mirror reflex collimation lens in order to expand the light path and overcome the effect of surface particles on the IL and RL performance. Tiny deviations in the fiber alignment in plug connections (lateral offset) are all but eliminated. This new technology, which has been patented by 3M™, not only permits multimode applications but also makes it possible to use the expanded beam for singlemode applications – something that was not possible in the past, in particular in the case of multiple fibers.

The Rosenberger HPK system can achieve 275 A at 85 °C up to 1000 V. With their excellent vibration and current capacity performance the HPK connectors are well-suited to typical high-voltage electric vehicle applications such as the connection between battery, inverter and PDU. The range includes 1-, 2-, or 3-pole connectors which for maximum flexibility can be used with copper or aluminum cables in four different cable cross sections. Straight and angled cable couplers as well as corresponding headers are available, either with or without HVIL (high-voltage interlock).

Rosenberger has many years of experience in the manufacture of high quality cable assemblies for a wide variety of industrial test & measurement applications. Our standard microwave cable assemblies for vector network analyzers (VNA), for example, are characterized by their excellent electrical and mechanical performance for frequencies up to 110 GHz. The range includes ultra-low loss cables for antennas or applications with high power requirements; miniature cables for test systems or applications demanding high flexibility; indoor and outdoor cables; specially shielded cables and extremely phase stable cables for test & measurement applications. In defined lengths armoured RFlex™ cables are also available. Customer-specific assemblies and solutions can be ordered on request.