High-Temperature

Following the revision of the IEC 61169-24 interface standard in response to the increasing performance demands of the broadcast television sector, Rosenberger has fundamentally revised its F-interface calibration elements. The considerably improved characteristics include an extended frequency range, from DC to 4 GHz up to DC to 6 GHz, and a doubling of mating cycles from 500 to 1000. The new 6 GHz-spectrum F series from Rosenberger comprises calibration adaptors, calibration loads, opens, shorts and loads. A new “full range” calibration adaptor is also available, addressing the extremely wide male connector pin tolerances of 0.64 mm to 1.13 mm.

Rosenberger RPC-7 “hermaphroditic” connectors with 7 mm diameter at outer contact are designed for precision measurements up to 18 GHz and are suitable for semi-rigid cables and microwave components. Mating electrically with center and outer conductor by end-surface (butt) contact, the mechanical connection is designed as a counter-sinkable threaded socket. For total flexibility, these low reflection connectors are intermateable with all common 7 mm series connectors including APC-7, PC-7, GPC-7 or Precifix AA. Furthermore, RPC-7 and RPC-N connector heads are interchangeable using the same bead type. The wide product range comprises connectors and connector heads, adaptors, interchangeable port connectors, airlines as well as test & measurement accessories such as RPC-7 calibration and verification kits, test cables, attenuators or measurement equipment (open – short – load).

Complementing its standard HV connector portfolio, Rosenberger develops and manufactures customer-specific high-voltage components for electric and hybrid vehicles. These enable the lowest possible transition resistances, ensuring long-term low-loss performance and reliability in critical electrical systems such as those for battery charging, cell management, heating, and air conditioning. From concept to final delivery, Rosenberger high voltage custom components are the perfect fit every time. Using its component toolkit, including PDUs, Y-splitters, Busbars and Cell Modules, Rosenberger can develop and manufacture a wide array of tailor-made solutions. These are designed and configured precisely to the relevant vehicle architecture, allowing ideal combinations of the various fuses, relays and other passive and active components required. Power Distribution Units (PDU) Power distribution units (PDU) for vehicles have multiple power input and outputs and use all kinds of connectors, fuses, and relays. In these cases, the PDU generally forms the central link between the vehicle power electronics and batteries, electric motors, and other ancillary units. Y-Splitters Y-splitters are used to distribute the power from one cable harness to two or more units, e.g., between a DC/DC converter and an electric air-conditioning unit. Rosenberger can design Y-splitters for applications with and without shielding for cable cross sections from 4 mm² to 95 mm² in collaboration with the customer. Cell Module Connectors The Rosenberger HV portfolio also includes cell module connectors. These connectors are required to link battery modules within a battery pack. For typical battery applications, multiple custom-designed battery connection points are required. Based on the robust pressure contact system, Rosenberger offers cell module connectors without flexing parts in the contact area. Systems from 100 to 350 A are available. Different assembly directions, coding variants as well as cross sections can be implemented according to customer-specific requirements.

Rosenberger Rack Analyzers are designed to make PIM tests in production or test lab environments exceptionally modular, precise, and efficient. The budget-friendly broadband base unit concept offers maximum flexibility thanks to the option of connecting up to 11 filter units to one base unit. Integrated DTF measurement enables faster fault-finding by accurately pointing out the source of PIM. With the plug-and-play filter concept, intuitive software operation and easy-to-replace dust filters, it is possible to create a significant reduction in production downtime caused by changes in test frequencies or maintenance and servicing work.