_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Zinc/Zn
Connectors & Adaptors
QN
Product code 7HSSFY
Rosenberger QN coaxial connectors are based on the N connector interface. With a frequency range of up to 11 GHz depending on the connector and cable type, the quick-lock mechanism enables reliable and easy connection, 10 times faster than standard N offerings. Ideal for tight spaces such as those found in mobile base stations, the packing density of QN exceeds that of N connectors due to the minimum pitch and toolless assembly. Torque spanners are not required. QN and standard N connectors are not intermateable.
- Impedance 50 Ω
- Interface according to IEC 61169-42
- Frequency range DC to 11 GHz
- Return loss (cable connector straight)
- ≥ 32 dB @ DC to 3 GHz, ≥ 25 dB @ 3 GHz to 6 GHz, ≥ 20 dB @ 6 GHz to 11 GHz
- Minimum pitch 20 mm
- Flexibility 360° turnable
- Mating cycles ≥ 100
Specification Sheet
1.6-5.6 connectors perform at 75 Ohm up to 4/12 GHz and are characterized by high mechanical and electrical stability. They are mainly used for reliable transmission of high bit-rates. IInd and IIIrd generation 1.6-5.6 connectors are intermateable and feature different coupling mechanisms for allowing male types to be connected to all female types. The screw-on coupling version provides positive, familiar mating, while the quick-lock/push-pull coupling version enables quick installation. This series complies with CECC 22240 standards.
Item Successfully Added to Cart
Rosenberger has expanded its product portfolio for 100BASE-T1 connections with AMEC Ethernet connectors. In technical cooperation with Delphi/APTIV, further cost-effective high-speed Ethernet solutions for the automotive market are being developed. These robust, compact connectors deliver the high performance necessary for a range of applications including autonomous driving, driver assistance, rear seat entertainment, and LVDS & camera systems. The Delphi and Rosenberger AMEC program is 100 % compatible, ensuring the customer has a fully approved second source.
Item Successfully Added to Cart
Rosenberger RPC-1.00 precision connectors – with 50 Ω impedance and 1.00 mm outer diameter – can be used for challenging test & measurement applications up to 110 GHz. They are characterized by excellent technical data over the full frequency range, meet the highest levels of reliability and repeatability of performance, and are intermateable with common 1.00 mm connectors. The standard portfolio covers flexible and semi-rigid cable assemblies, adaptors and PCB connectors. Waveguide-to-coaxial adaptors and gauge kits are also available. Customer-specific cable assembly solutions with or without armouring available on request.
Item Successfully Added to Cart
Rosenberger TNC* coaxial connectors are based on BNC connector characteristics and interface dimensions. However, the screw-on locking mechanism enables reliable, quick and easy interconnection while also allowing their use under higher environmental loads compared to BNC connectors. They are designed for application in various industries including aerospace, telecom and mobile applications. 50 Ω versions up to maximum 10 GHz available 75 Ω versions up to maximum 4 GHz available on request Due to the internationally standardized TNC interface dimensions a perfect 75 Ohm characteristic impedance cannot be realized *TNC = Threaded Neill Concelman / Thread Navy Connector
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
