Specialty Fibers

The CT-101 is designed for cleaving silica fiber with 80 to 250mm cladding diameter, specially for its angle cleaving capability.

The CT-102 is designed for cleaving silica fiber with 80 to 250mm cladding diameter, specially for its angle cleaving capability.

Optical fiber cleaver by Fujikura's technologies as world-wide leader of fusion splicers. The technologies make the operation easy and the cleaving quality good.

Optical fiber cleaver by Fujikura's technologies as world-wide leader of fusion splicers. The technologies make the operation easy and the cleaving quality good.

Whether splicing similar fiber types or double clad LDF fibers for high power lasers, the FSM-100M+ splicers provide multiple solutions for diverse production needs. The FSM-100M+ sets the standard for fusion splicing with a multitude of new features designed to make splicing easier.

The CT52 is designed for cleaving silica fiber with 125μm cladding diameter, specially for its short length cleaving capability. Minimum 3mm cleave is possible by up to 900μm fiber coating, while the coating to be clamped.

AFL’s PowerCleave combines the precision of an ultrasonic cleaver with the ease and improved fiber management of the Fujikura fiber holder system. The PowerCleave™ utilizes the tensile stress method to avoid touching or damaging the bare glass surface during cleaving, ensuring highly robust, reliable and durable splice results. The PowerCleave provides consistent flat ends even at cleave lengths as short as 3 mm. Specially designed for use with Fujikura’s specialty market splicers, this advanced cleaving system allows for more reliability and greater splicing consistency with less dependence on operator technique.

Nyfors product. The Auto Cleaver is designed for cleaving silica fiber with 80 to 230μm cladding diameter.

The FP-04T/05 provide these same performance levels for 8/12 fiber ribbon respectively. . The FPS04 and FPS08 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.

FSR-05 is a model which has recoating only without a proof tester. This model is appropriate for manufactures that don’t require constant proof testing after each recoat.

FSR-06 is a model which has a recoater and proof tester with a linear clamping system. This model is appropriate for devices which conformation of reliability is required.

The FSR-07 has a recoater and mandrel proof testing.This model is appropriate not only for recoating but also reliability proof testing as well as tension testing to failure.

The ReCoater 2 is used to restore the protective coating on acrylate coated optical fibers in high strength applications. Molds are available in different sizes to cover a range of coating diameters and can easily be exchanged by the operator with no realignment required. Custom molds are available upon request.

Nyfors Producrts.The extended length ReCoater 2 XL is used to restore the protective coating on acrylate-coated optical fibers in high strength applications. Designed to process long sections of stripped fiber, it accepts silicone molds of up to 110 mm length.

Nyfors product. This compact and easy-to-use recoater is extremely portable and allows for quick and easy recoating of optical fibers. NYFORS silicone mold technology provides extreme flexibility for a variety of recoating needs.