_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Zinc/Zn
Connectors & Adaptors
RPC-SL
Product code VDKLHA
The Rosenberger RPC-SL series are interchangeable port connector systems for use with test equipment where test ports are frequently mated and re-mated. Under such heavy usage, Rosenberger RPC-SL interchangeable port connectors allow the equipment/device interface to be fully protected from potential damage, avoiding the risk of costly repairs. The RPC-SL port connector includes a panel mounting half and a sexless interface which features two spring-loaded butt contacts. This ensures no wear occurs during mating and eliminates the possibility of accidental damage from mismatching of connector halves. Furthermore, the interface between the panel mount and the adaptor is slotted, preventing the mating faces from rotating and possible damage. The RPC-SL portfolio offers both 26.5 GHz and 40 GHz versions. While adaptors can be interchanged and are available in different connector series, the connector heads in these two ranges are not compatible and can only be used with their own system.
- Impedance 50 Ω
- Interface according to Rosenberger Interchangeable port connector system
- Mating cycles ≥ 3000
Specification Sheet
Rosenberger N coaxial screw-on connectors offer a high degree of weather protection and excellent intermodulation. Their mechanical stability and weather resistance make N connectors well-suited to outdoor applications such as mobile antennas.
Item Successfully Added to Cart
Rosenberger has introduced the P-SMP series of Power/RF coaxial connectors, combining all the space saving advantages of SMP connectors with the high performance of SMA connectors. Unlike SMA and QMA solutions, minimum board-to-board distances of 12.6 mm can be realized by using bullets in different lengths. Furthermore, P-SMP connectors are designed for high power loads, up to 200 W @ 2.2 GHz continuous power, and can handle high frequencies up to 10 GHz. Typical applications therefore include board-to-board connections in base stations or board-to-cable connections in power amplifier filter units.
Item Successfully Added to Cart
UHF* coaxial connectors with geared screw locking frontal interlocking teeth and without defined impedance are intended for very low frequency applications up to 300 MHz. They are intermateable with “banana” connectors. *UHF = Ultra High Frequency, when developed in the 1930s, in fact today even wrong.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
