Nyfors AutoCoater 2

The USC-03 is Ultrasonic Cleaner designed for the cleaning of optical fiber using the FH-40, 50, 60 and 100 series of Fujikura Fiber Holder. Timer switch and Cleaning Power Volume enable to edit cleaning program. By using this equipment the fiber can be cleaned after stripping without any physical contact.

SS03 have three holes. The smallest hole is for stripping 250 um cable down to glass fiber. The second hole is for stripping 900 um buffer coating down to 250 um buffer coating. The biggest hole is for stripping 2-3mm fiber jacket down to 900 um buffer coating.

Nyfors product. The AutoCoater 2 SC™ is used to restore the protective coating on acrylate coated optical fibers in high strength applications. It is fully automatic, allowing for operator skill independent operation in factory environments with high cost and productivity advantages. This modified version of the automatic AutoCoater 2™ is equipped with special clamps for recoating applications where only short lengths of fiber are available. A narrower positioning and shorter distance between the fiber clamps than in the standard version enables clamping and recoating of fibers as short as 124 mm without reducing the recoat length itself.

Nyfors Product. The AutoCleaver LDA is an automatic system for precision cleaving of circular large diameter fibers (LDF). It is a special version of NYFORS’ well known large diameter cleaver designed for both perpendicular and angled cleaving of fibers ranging from 230 up to more than 800 μm in diameter.