_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Zinc/Zn
Specialty Fibers
Nyfors AutoCleaver
Product code 13X8YF
Nyfors product. The Auto Cleaver is designed for cleaving silica fiber with 80 to 230μm cladding diameter.
- Fully automatic
- Low cleave angles < 0.3 degrees
- Very flat end faces
- Operator independent
- Designed for production and laboratory environments
- Automatic fiber waste collection
- Long-lasting diamond
- PC controllable
Specification Sheet
The APM-101 perform all the steps required to prepare optical fibers before splicing – automatically and with high consistency. This includes stripping the fiber without degrading fiber quality, cleaning fiber with alcohol to remove coating residue, and cleaving consistently at a right angle to the fiber axis. The entire process is complete in as little as 23 seconds.
Item Successfully Added to Cart
The APM-102 perform all the steps required to prepare optical fibers before splicing – automatically and with high consistency. This includes stripping the fiber without degrading fiber quality, cleaning fiber with alcohol to remove coating residue, and cleaving consistently at a right angle to the fiber axis. The entire process is complete in as little as 23 seconds.
Item Successfully Added to Cart
The CT-102 is designed for cleaving silica fiber with 80 to 250mm cladding diameter, specially for its angle cleaving capability.
Item Successfully Added to Cart
The FSR-07 has a recoater and mandrel proof testing.This model is appropriate not only for recoating but also reliability proof testing as well as tension testing to failure.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
