_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Zinc/Zn
Specialty Fibers
Nyfors AutoCleaver LDF-M
Product code FBO339
This fully automatic optical fiber cleaver is designed for fast and flexible fiber processing in factory and laboratory environments. Easily interchangeable fiber handling parts enable high precision cleaving of different fibers in the range from 80 μm up to 600 μm cladding diameter with industry leading repeatability and consistency.
- Fully automatic
- Standard and large diameter capability (80 to 600μm)
- Low cleave angles < 0.30 degrees
- Designed for production and laboratory environments
- Operator skill independent and easy to use
- Automatic waste fiber collection
- Long-lasting diamond blade
Specification Sheet
LTC-01 is the special tool for removing loose tube without damage to the UV acrylate coated optical fiber inside the loose tube.
Item Successfully Added to Cart
The FAT-04 is designed to arrange 250μm coated fibers and to make a temporary ribbon configutation so that the fibers may be mass fusion spliced using the same procedures as conventional ribbon fiber.
Item Successfully Added to Cart
HTS-12 is designed for stripping single count of silica optical fiber by keeping the stripped fiber's glass surface free from any physical contact. In order to achieve the above condition, the HTS-12 has a precise linear slide base for stripping action. The fiber is not scuffed by the blade or any other materials when being stripped. The HTS-12 is equipped with a heater to soften the fiber coating. The HTS-12 accepts the FH-40 series and FH-100 series Fiber Holder System
Item Successfully Added to Cart
FSR-05 is a model which has recoating only without a proof tester. This model is appropriate for manufactures that don’t require constant proof testing after each recoat.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
