_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Zinc/Zn
Specialty Fibers
Nyfors CleaveMeter 3D
Product code WLRONX
The CleaveMeter 3DTM is a phase-shifting Michelson interferometer for non-contact end-face inspection of cleaved and polished optical fibers with cladding diameters up to 1200 μm. Designed for both production and research applications, this comprehensive fiber optic testing system combines full resolution, three-dimensional surface topography reconstruction and mapping with automated, operator independent measurements of cleave angle and surface flatness in a small, lightweight benchtop unit.
- Full resolution surface reconstruction
- 2D view of surface topography and pointwise slope
- 3D view of surface topography with camera and lighting control
- Extremely accurate, operator independent measurements of cleave angle and surface flatness over arbitrary diameters
- Optional pass/fail indication of cleave angle for fast operation in production environments
Specification Sheet
Item Successfully Added to Cart
The FSR-07 has a recoater and mandrel proof testing.This model is appropriate not only for recoating but also reliability proof testing as well as tension testing to failure.
Item Successfully Added to Cart
Nyfors Producrts.The extended length ReCoater 2 XL is used to restore the protective coating on acrylate-coated optical fibers in high strength applications. Designed to process long sections of stripped fiber, it accepts silicone molds of up to 110 mm length.
Item Successfully Added to Cart
Nyfors product. The AutoCoater 2 SC™ is used to restore the protective coating on acrylate coated optical fibers in high strength applications. It is fully automatic, allowing for operator skill independent operation in factory environments with high cost and productivity advantages. This modified version of the automatic AutoCoater 2™ is equipped with special clamps for recoating applications where only short lengths of fiber are available. A narrower positioning and shorter distance between the fiber clamps than in the standard version enables clamping and recoating of fibers as short as 124 mm without reducing the recoat length itself.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
