AC power cord ACC series

The 41R is a equipped with good mobility and our wireless communication function, “Active Blade Management Technology”, where the splicer is connected to and monitors the fiber cleaver and ribbon fiber stripper With Active Blade Management Technology, it is far easier to maintain high quality fiber preparation. This product monitors every fiber’s end shape to assess the cleave quality. If the cleaved fiber is bad due to a worn blade position, this product sends a command to the fiber cleaver to rotate to the next viable blade position. The cleaver then executes the blade rotation automatically via an internal motor. This functionality greatly prevents operators from making a bad splice due to a worn out blade position. In addition, both the heating temperature and heating time of the ribbon fiber stripper are automatically changed according to the splice mode setting.

The CT50 offers enhanced drop impact resistance compared to other existing cleavers and allows workers to replace the cleaving blade, providing customers with a drastic reduction in handling time and maintenance costs. The CT50 changes the position of the cleaving blade automatically and in accordance with the condition of the cleaving state of optical fibers on a fusion splicer through wireless communication. In addition,the CT50 can complete cleaving works including scrap collection, with a single-step.

The FST-12 is a tool to quickly split a 12-fiber ribbon into individual fibers or sub-groups with separation ratio from 1:11 to 6:6.

The visual fault identifier FVI-01 is a miniature red-laser light source. The red light generated from FVI-01 will be identified at the break point, sharp-bend or high loss connection in coating fiber or fiber cord.